FZ220070 Portable Pickleball Net, Easy to Assemble - Black

Expertly crafted for your enjoyment and convenience, the FZ FORZA Pickleball net - Black is the perfect addition to any game of Pickleball. With dimensions of 6, 7 meters long and an easy setup and take down process, it's never been easier to challenge your friends to a riveting game of Pickleball. Plus, the included carry bag with two shoulder straps makes transportation a breeze.

Pickle Net assembly Instructions:

1. Assemble the base frame first, working from one side to the other and fitting sections together as shown.
a.  Connect one of the sections marked #2 with one of the end bases #1.
b.  Insert section #3 into the other end of part #2.
c.  Continue with 2 of the sections marked #7.
d.  Slide the center support base #8 over the 2nd Section #7.
f.  Continue with the 3rd and 4th sections #7, then #6, the other section #2 and finally          the other end base #1.
2.  Insert one vertical end post #4 into one of the end bases #1.
3.  Position the net so that the center strap faces the ring in the support base (see photo).
4.  Slip a net sleeve over the vertical end post. Insert the other end post into the other net sleeve.
5.  Extend the net with the post to the other end of the assembly. Carefully insert the end post into the end base using just enough pressure to insert the post into the end base.
6.  Fasten the center strap as shown in the photo below.
7.  Position the net sleeve and adjusting strap about ½ inch below the bottom of the         black cap of the end post at each end as shown in the photo. That will make the net 36   inches at the sideline.
8. Use the Velcro straps to further stretch the headband just enough to eliminate                sagging.

Note: The easy way to repeatedly assemble and disassemble the Pickleball net is to leave the net over the end posts and simply roll the net up into the carry case.